| Protection
[back to top] |
|
Surge
Protection redirects high energy transients harmlessly to earth
and away from associated equipment and operators.
Available
July 1999
Advance orders
already being taken!
|
Instant
protection, using the new C5 'Clover leaf' connector.
|
| Applications
[back to top]
|
| Electronic
equipment using the new C5 'Clover leaf' connector ie; IBM / Dell
/ Apple / Compaq notebooks. |
Every
Inline Surge Protector is tested to ensure very fast operation and
minimum let through voltage. The unit appears invisible to the mains
filter fitted inside modern electronic equipment. This state of
the art patented product provides cost effective mains transient
protection. |
| Specifications
[back to top]
|
|
Voltage Rating
|
230 Volts
|
|
Maximum Current Rating
|
10 Amps
|
|
Maximum Current Surge Handling
|
2.5 kA
|
|
Response Tim
|
<10nS
|
|
Protection Modes
|
L-N, N-E, L-E
|
|
Power 'ON' Indicator Light
|
No
|
|
Protection Status Indicator
|
Yes
|
|
Power Consumption
|
0.6 Watts
|
|
Surge Handling Capability
|
5kV (1.2/50 us O/C) @ 2-5kA (8/20us
S/C) Let through voltage <900V 6kV (0.5us/100kHz Ring
Wave) @ 500A (S/C) Let through voltage <900V
|
|
Location Category BS6651: 1992
Appendix C
|
A-high / B-medium
|
|
Earth Leakage (typ.):
|
30uA
|
|
Operating temperature
|
-5 oC
ro 40 oC (normal range)
|
| Enclosure: |
Flame retardant thermo plastic |
| Dimensions
(in mm) |
L
70
W 38
D 25
|
| Weight
(in grams) |
30 |
| Order
Code |
ISP6/BOW-CP |
| Audible
Alarm |
No |
|
| Features
[back to top]
|
- Flame
retardant molding
- Thermal
overload protection fitted as standard
- Noise
free operation with automatic reset after transient has passed
- Incoming
and outgoing surges are dissipated so 'no fault found' service
calls are reduced and
- equipment
performance is improved.
|
The
ISP6 has a neon light which indicates protection operational. The
light will extinguish should a high energy strike destroy the internal
protector, however power will still be supplied to the associated
equipment. Should the light go out the unit must be replaced to
restore surge protection. |
| Regulations
[back to top]
|
- Protection elements comply with latest issue of UL 1449
Transient Voltage Surge Suppressers (Aug 96)
- Complies with the IT safety standard EN 60950
- Satisfies the recommendations of BS6651 1991 Appendix C
|
The
internal surge suppressers are tested against 'worst case' conditions
as defined in International Standards IEEE C62.41-1991 Cat. B2 (test
wave 8/20us) |
| Prices
[back to top]
|
IDC
Plugs are pleased to announce that soon you will be able to purchase
our innovative range of products directly from this website through
a secure credit card transaction
|
QUANTITY
|
COST*
|
|
1
to 99
|
£7.20
|
|
100
to 999
|
£6.70
|
|
1,000
to 2,999
|
Call
for prices
|
| 3,000
to 5,000 |
Call
for prices |
| UK
RRP £7.76 inc VAT @17.5% |
*Local
taxes and shipping to be added at cost |
|
